Category Archives: Objects

TP-Link Archer C7 with OpenWRT

I bought myself a TP-Link Archer C7 because the 2.4Ghz congestion in my apartment has become so terrible that my good old TP-Link WR1043ND (no 5Ghz radios) is no longer adequate, and the C7 was very well spoken of among reasonably-priced 802.11ac routers. It also has some nice perks like two on-board USB ports, so I can use it as a print server (with p910nd) and have USB storage for logs (vnstat & co.) and such attached without a separate hub. I wasn’t feeling quite motivated enough to buy and set up one of the NUC-like cheap SFF Intel boxes as a router like Ars Technica and Jeff Atwood have recently noted is an increasingly good plan, based largely on the dearth of ac WiFi cards that work reliably in host mode.

Some notes that may be of use to others, particularly about firmware replacement on recent models and throughput:
Continue reading

Posted in Computers, Electronics, General, Objects | 14 Comments

Clevo P650SE/NP8651

P650SET510Flat_web

My 5-year-old T510 has been showing its age, mostly by falling apart (speakers died, parts held on with gaffers tape, occasional probably-thermal GPU lockups, etc.) and I decided it was time for a replacement. Unfortunately, the laptop market right now has absolutely nothing appealing (clickpads everywhere!) so I gave up and bought a closest-match Clevo P650SE chassis that I could kit out myself. There are a couple annoyances, but overall it’s a nice machine. Really long detail notes including a bunch of Linux tweaking below.

Continue reading

Posted in Computers, Electronics, General, Objects | Tagged , , | 5 Comments

RFID Exploration

I recently picked up a USB RFID reader/writer pod to play with, partly to learn enough to be dangerous about the tech, and partly hoping to tamper with the RFIDs in the current university ID cards. I’m pretty sure I failed on the latter point, but am succeeding at the former in the process.

RFIDKit

Notes from the first round of fiddling with it follow.

Continue reading

Posted in Computers, DIY, Electronics, General, Objects | Tagged , | 21 Comments

Galaxy S5

MyTouch 4G Slide vs. SGS5, flat dimensions.

MyTouch 4G Slide vs. SGS5, flat dimensions.

I got a Samsung Galaxy S5 (The T-Mobile flavor, SM-900T) a week ago. I’m pretty pleased with it overall, but many of the impressions worth sharing are not positive, particularly of the small-but-stupid variety. Much of the animus (and credit) is really for Google, not Samsung.
Continue reading

Posted in Computers, Electronics, General, Objects | Tagged , | Leave a comment

New Chorder

I’ve been playing with chorded input devices for years, and got the itch again recently.

CNChorder
Continue reading

Posted in Computers, DIY, Electronics, General, Objects | Tagged | Leave a comment

3D Printing KC Talk

I gave a quick primer on 3D printing as a Keeping Current (CS departmental) seminar yesterday.

It’s not a great standalone deck but posted (in reduced quality, gs -sDEVICE=pdfwrite -dCompatibilityLevel=1.4 -dPDFSETTINGS=/ebook -dNOPAUSE -dQUIET -dBATCH -sOutputFile=/path/to/output.pdf /path/to/input.pdf is good magic).

It seemed to be well-received, printed objects were played with, thoughtful questions were asked, I think this is the first time I’ve given a 3D printing primer to a wider group and not been asked the “guns” question.

Posted in Computers, DIY, Electronics, General, Objects, School | Leave a comment

Lab Fridge Repair: Thinking with 3D Printing

I’m posting this because it’s such a nice example for the standard “What are 3D printers really good for?” question.

When I got to the lab today, I was told the can chute in our mini-fridge was broken. Inspection showed that too many of the little plastic inserts/bushings that retain the bars were missing and/or broken. This is a years-old cheap GE minifridge, so it isn’t even worth looking for OEM replacements.

Now we get to the “Thinking with 3D printing” part: I plucked one of the remaining ones, went over it with some calipers, transferred the measurements into OpenSCAD, and printed one off to test fit. The ID was a little tight, so I adjusted the model, printed 6 more, and fixed the problem.

In case the model is useful for anyone else: OpenSCAD and STL.

Important Details:

  • This took like an hour from start to finish, and wasn’t the only thing I was doing at the time. The printing itself was around 1 minute per insert.
  • The new inserts are better than the originals. Not quite as pretty in some ways (though they are blue and glow-in-the-dark, because that’s our current junk filament), but the fit is considerably better.
  • That “iterate” step in the middle, where you just try it and adjust if needed is among the most beautiful things about 3D printers.
Posted in DIY, General, Objects, School | Tagged , , , | 4 Comments

T510 Touchpad Resurfacing

TPReplaced

I found a forum.thinkpads thread while looking into another touchpad issue recently, and learned two important facts:

  1. The bumpy touchpad texture I never loved that had worn off my T510 is just a sticker.
  2. Those stickers are replaceable.

Continue reading

Posted in Computers, DIY, General, Objects | Tagged , , | Leave a comment

It’s Complicated

I finally finished danah boyd’s recent book It’s Complicated, and It’s one of the best pieces of non-fiction I’ve read in years.

I always feel there is a dramatic shortage of people equipped with both the appropriate formal methods in the social sciences and technological sophistication to make credible, meaningful, observations on technologically mediated culture. danah is reliably the best of them; I’ve read quite a number of her papers and articles, and the book is fuller and more readable than either.

Almost every passage roughly follows a pattern of statement, with attribution, relevant anecdote from original research, message. It is meticulously referenced (roughly a quarter of the book’s volume is appendices and references), which comes off a little academic, but anything less conscientious would end up being the kind of prognostication much of the book is trying to correct, and the actual writing comes off as far more pleasant and readable than it sounds. It is occasionally repetitive, but every time the repetition asserted itself, it was clearly a case of “I keep saying this over and over and they just don’t get it” rather than any sort of sloppy writing.

Occasionally, there are wistful references to the internet I grew up on; the author is about a decade older than I am, and grew up on the leading edge of the internet I was on the trailing edge of. The one where Ender’s Game (Locke and Demosthenes plot), True Names, and Ready Player One can happen, before the carpetbaggers arrived in force and (to quote the book) “When teens go online, they bring their friends, identities, and network with them.” situation asserted itself. I’m pretty sure my generation killed that different identity system, and buried it behind us (One of her early notable efforts was documenting the introduction of Friendster, which was in some ways the beginning of the end).

At least once a chapter, I found myself in vigorous agreement with some message being presented, enough that if there were people around when I was reading they could tell. The vast majority of the observations, while based in research into teens, also seem to generalize reasonably well to the behavior of most populations. The only unfortunate part is that I suspect the people making decisions about youth and technology who desperately need to hear what it has to say are not going to be the ones to read it.

Note that there is a PDF copy right on the author’s site, so even if you don’t want to go buy it, you can legitimately peruse it for free.

Posted in Computers, General, Literature, Objects | Leave a comment

Singer no.42 Swingarm Repair

I’ve posted before on the slow restoration of my old 201-2 and its cabinet, last time I noted that my cabinet’s swing-arm wouldn’t auto-deploy, which prompted some discussions with other folks about the mechanism. One of those other pieces of input was someone kind enough to tip me off in the comments of my last note about this that there were a couple sets on ebay, which I looked at for details, then ended up buying one of for $22 shipped. I really only needed the lower pin and spring, but the spares are nice. This is what the seller pictured, and the light and camera are better than mine, so I’ll just use their picture, because it was well packed and exactly as described:

SingerSwingarm

I now have mine working and have detail photos and measurements from the process that should make it easier for others to figure these things out. It’s actually a really simple mechanism, the following two pictures are pretty much all you need to know about how it goes together and works.
Continue reading

Posted in DIY, General, Objects | 17 Comments